Insulation Wholesalers Backer Rod is a CFC free closed cell polyethylene foam rod that provides a backing material primarily for use with elastomeric and PU sealants or any cold applied sealants.
Backer Rod has Three Major Functions:-
• To control the depth of the sealant in proper relation to the joint width.
• To provide a backing against which the sealant is applied. Forcing the sealant to the sides of the joint.
• To prevent 3 sided bonding, ensuring proper functioning of the joint sealant.
APPLICATIONS
• BACKING FOR SEALANTS
• PRECAST PANEL JOINTS
• EXPANSION JOINTS
• CONTROL JOINTS
• AROUND WINDOW & DOOR FRAMES
• ISOLATION JOINTS
• AROUND PENETRATIONS
• PERIPHERAL JOINTS
• GLAZING
Key Benefits Summary
• New Zealand made
• NZ building code compatible
• CFC free
• No water absorption , closed cell
• Compatible with most sealants
• Non Staining
• Non Toxic , odourless
• Wide Range of sizes available
• Resistant to most Chemicals
• Easily compressed
Joint Sealant
Follow instructions for joint sealant application as directed by sealant manufacturer.
Where priming of the joint is necessary, primer should be applied only to the joint surfaces and allowed to dry before backer Rod is installed. DO NOT PRIME BACKER ROD
Instructions For Use
• Joint or opening must be free of all contaminants be clean and dry.
• Select correct rod size for joint width, the rod should have 25% greater width to ensure that it remain firmly in place during application of sealant.
• When installing the rod it is essential to use a blunt instrument or roller to avoid puncturing the surface. This may result in bubbles to appear in the curing sealant. Press the rod uniformly into the joint to the predetermined depth without any twists, bumps, gaps or stretching.
Warranty
Insulation wholesalers products are manufactured to rigid standards of quality. No liability can be accepted for the information provided in this leaflet although it is published in good faith. We reserve the right to alter product specifications without prior notice, in line with Company policy of continuous development and improvement.